Dyla' Removable Upholstered Single Bed with removable cover

The Dyla upholstered single bed by Kave Home is a versatile product perfect for any decorative style. The legs are made of beech wood, sustainable, originating from sustainable forests with controlled logging. Please note that it requires the addition of a box spring and mattress.

why do we love it? A perfect bed because you can adapt it to your needs, great variety of colors to choose from. It is also a perfect product for the kids' room thanks to the treatment of the fabric resulting in an anti-stain protection and it is completely removable so you can either clean it comfortably or change the cover for another color.

Procomobel recommendation: Any color you choose with a bedding in neutral or light tones will make an ideal and lingerie set, being able to give the touch of color with cushions and a plaid.

Important: Due to the manufacturing process and/or the materials with which it has been created, this product may not be identical to the images shown. These alterations may slightly affect the dimensions, shades and finishes (cracks, knots, marks...). Singularities that undoubtedly give an added value to the product.

Procomobel declines all responsibility for damage to persons and / or things, or to the product itself, caused by improper use of the product.

Product dimensions (cm): Height: 96 x Width: 108 x Depth: 203

Bed height: 26 cm

Height from the floor to the base of the bed: 37 cm

Product weight: 26.9 kg

Leg material: Beech wood (Fagus Sylvatica)

Bed frame finish: Foamed

Legs finish: Transparent, Lacquered

Headboard finish: Foamed

Stain resistant: Yes

Headboard fabric composition: 100% Polyester

Fabric composition: 100% Polyester

Headboard frame construction: Foam, E0 Particleboard

Headrest fabric weight: 400 g/m²Fabric weight: 400 g/m²

Fabric weight: 400 g/m²Bed frame material: 400 g/m²Bed frame material: 400 g/m²Bed frame material: 400 g/m²Bed frame material

Bed frame material: Foam, MDF E0 (medium density fiberboard with low formaldehyde emissions class E0), Particleboard E0, Steel

Head material: Fabric, Foam, E0 particle board, Steel

Filling material: Foam, Synthetic fibers

Main material: Fabric

Bed cover removable: Yes

Antibacterial outer fabric: No

Hypoallergenic outer fabric: No

Headboard fabric type and specification: Plain weave

Fabric type and specification: Microfiber

Maximum total load: 180 kg

PEFC certified: Yes

Assembly difficulty: Easy

Bed base included: No

Headboard included: Yes

Mattress included: No

Instructions for use and maintenance: Cold wash (below 30°C). Can also be professionally cleaned with any solvent except trichloroethylene. Do not tumble dry or bleach

Country of origin: EN

For indoor use: No

For outdoor use: No

For indoor use: Yes

Adjustable legs (Y/N): No

Recommended person(s) to assemble: 2

General recommendations: Do not place near direct heat sources. Keep away from direct sunlight. Do not use abrasive products such as acetone, bleach, bleaching agents, solvents, etc. Sharp elements can scratch the surface of the product

Water repellent: No

Mounting required: Yes

Fire resistant: No

Mounting Suggestions: Check and sort all hardware before beginning assembly. Mount on a soft surface

Assembly time: 30 min

Types of variations: No natural variations, Light and environmental conditions may distort the color perception of the product.

Tolerance of measurements (± cm): 2 cm

Note: Open the packaging carefully and avoid using sharp elements. Always keep the original packaging for possible returns or exchanges