Borreguito upholstered armchair 'Meghan'

A simple armchair design that is defined by its minimalist character achieved through the combination of an exposed structure in solid ash wood and its upholstery.

Product with other finishes: chenille fabric and stain-resistant fabric, see related products.

why do we love it? It is a model that evokes the armchairs of the 70s, with a comfortable seat and armrests in ash wood that give it an almost vintage touch.

Procomobel recommendation: Combine it with a nice side table and you will have a nice space to rest. It can even be used as a barefoot chair in your bedroom.

Important: Due to the manufacturing process and/or the materials with which it has been created, this product may not be identical to the images shown. These alterations may slightly affect the dimensions, shades and finishes (cracks, knots, marks...). Singularities that undoubtedly give an added value to the product.

Procomobel declines all responsibility for damage to persons and / or things, or to the product itself, caused by improper use of the product.

Product dimensions (cm): 78x77x83

Product weight (kg): 21.5

Seat width (cm): 66

Seat height (cm): 43

Seat depth (cm): 53

Measurement tolerance (± cm): 2

Armrest width (cm): 6

Backrest height (cm): 40 cm

Leg height (cm): 13 cm

Armrest height (cm): 53 cm

Leg material: Ash wood (Fraxinus Excelsior)

Main material: Fabric

General recommendations: Do not place near direct heat sources. Keep away from direct sunlight. Do not use abrasive products such as acetone, bleach, bleaching agents, solvents, etc. Sharp elements can scratch the surface of the product.
Clean with a cloth dampened with a mild soap solution and dry immediately with a dry cloth. Remove dust with a feather duster.

Leg finish: Transparent, Lacquered

Back finish: Foam

Main finish: Upholstery

Removable seat covers (Y/N): No

Fabric Composition: 95% Polyester, 5% Acrylic fibers

Frame Construction: E0 Particleboard, Pine wood (Pinus pinaster)

Backrest foam density: 20 kg/m³

Seat foam density: 30 kg/m³

Seat material details: Foam, Particle board E0, Pine wood (Pinus pinaster), webbing

Armrest material details: Ash wood (Fraxinus Excelsior)

Made from recycled materials: No

Fabric weights: - 590 g/m² - 400 g/m² - 400 g/m² - 590 g/m² - 400 g/m²

Seat filling material: Foam

Materials: Fabric, Foam, E0 particle board, Pine wood (Pinus pinaster), Webbing, Ash wood (Fraxinus Excelsior)

Resistance to pilling: 4 - Very good

Fabric wear resistance: >80.000

Type and specification of fabric: - Fleece - Microfiber

Assembly required: No

Stackable: No

Maximum total load (kg): 130

Recommendations for unpacking: Be careful when opening with knife. Keep the packaging for a few days in case of return.

PEFC Certified: Yes

Manufactured according to Standard: EN 12520:2015 for seats for domestic use

Includes headrest: No

Includes additional cushion: No

Includes armrests: Yes

Footrest included: No

Includes external footrest: No

Foam hardness level: Medium

Country of origin: ES

For indoor use: Yes

Reclining: No

Water repellent: No

Fire resistant: No

Backrest with removable covers: No

Color fastness to light: 5 - Very Good

Type of leg protection: No

Type of armrests: Flat

Types of variations: Variation in grain and/or shade, Light and environmental conditions may distort the color perception of the product.

Note: Open the packaging carefully and avoid using sharp objects. Always keep the original packaging for possible returns or exchanges